|
YX145-600 Color Steel Wall Panel
Color steel plates are often used in engineering construction. As a simple and economical color steel plate, it has been widely promoted and rapidly developed. There are many types of color steel plates, including color coated panels, color steel irregular panels, color steel sandwich panels, rock wool sandwich panels, purification panels, antique tiles, glazed tiles, plastic steel doors and windows C steel Z steel, etc. Construction requirements for color steel plates For better waterproofing, after placing the roof panel, fold it 3cm close to the ridge of the roof for about 800. 2. If the roof panel transportation roof truss has not been fully installed on the same day, they should be firmly fixed to the steel roof truss for acceptance and keying, and they must firmly accept the details of Brown rope or 8-wire, which will prevent any damage to the roof in the north-south climate. 3. The ridge cover plate should be constructed as soon as possible after the roof is completed. If construction cannot be carried out immediately, the insulation material at the ridge should be covered with plastic cloth to prevent the impact of rain on the insulation effect. 4. During the construction of the ridge cover plate, the sealing between the ridge cover plate and the top plate should be ensured to be reliable. When lifting the roof and pulling it to the roof truss for placement, the main ribs of the roof panel should be carefully aligned with the installation position. If it is not the main rib, it should be adjusted immediately. We will definitely ensure the accuracy of the placement of the boards, check the vertical board roof drainage ditch, ensure the accuracy of all dimensions, and use the same method to place subsequent boards, always ensuring that the end of the roof panel is a straight line.
|
