Hotline

(+86)137-7105-3760

Home >> Products >>Wall System >>Color Steel Wall Panel >> YX18-63.5-825 Color Steel Wall Panel
Product Detail

YX18-63.5-825 Color Steel Wall Panel

  • DETAILS

What is the difference between YX18-63.5-825 color steel and galvanized steel?

YX18-63.5-825 color coated steel plate refers to a type of steel plate with organic coating. Color steel plates are divided into single-layer plates and color steel composite plates. The following is the difference between color steel and galvanized steel: color steel and galvanized steel can be distinguished by whether the surface is painted or not. It has the advantages of good corrosion resistance, bright color, beautiful appearance, convenient processing and forming, low original strength of steel plates, and low cost. The difference between the two lies in whether there is paint. At present, many manufacturers cut corners to save costs, but doing so will reduce the thickness of the substrate and increase the thickness of the peritoneum. There is nothing on the surface, but the service life of the color steel plate has been greatly reduced.

Generally, the galvanized layer of galvanized sheet is thicker, about 10um or more, and has strong anti-corrosion ability. Therefore, it is a commonly used galvanizing process. However, cold galvanizing is very thin, about 3-5 microns. The hot-dip galvanized surface is rough and shiny. In severe cases, there may be zinc splashes, which are electroplated smoothly and appear gray (dirty). Galvanized steel plates produced by electroplating have good processing performance. The general chemical industry has a lot of cold galvanizing, which is suitable for small parts; Hot dip galvanized thin sheets are generally used for power equipment and components, and are suitable for large components and equipment. There is a fundamental difference in coating structure between hot-dip galvanized sheet and cold dip galvanized sheet. There is a brittle composite layer between the pure galvanized layer of hot-dip galvanized steel plate and the base layer of the strip steel. When pure zinc coating crystallizes, more zinc flakes are formed, the coating is uniform, and there are no pores. The heat treatment process of hot-dip galvanized sheet and cold dip galvanized sheet is also completely different. Hot dip galvanized iron sheets are generally made of cold-rolled steel sheets as raw materials. Annealed and hot-dip galvanized iron sheets are used for continuous galvanizing lines and steel strips, which are heated and cooled in a short period of time. Therefore, the impact of strength and plasticity on the stamping performance of cold-rolled thin sheets is to some extent greater than that of degreased and annealed cold-rolled thin sheets produced by professional production lines.


1689301060703292.jpeg



Phone: (+86) 137-7105-3760

Contact person: Mr. Xiao

Address: Workshop No. 9, Baishiao No.3, Xiashan, Hengpi Town, Enping City, Guangdong Province



Navigation


Home                          Products

About                          Cases

News                          Contact





WeChat


×
seo seo