|
-
No price
Basic knowledge of workshop steel structure quotation 1. Before receiving design information, it is necessary to be familiar with the design information, such as material specifications, surface treatment requirements for roof panels, purlins, etc; 2. According to my habit, the quantity of each structure in the steel structure workshop can be calculated one by one (to avoid calculation omissions, calculations can be carried out in the order of the drawings; or the six parts of the steel structure in the construction workshop - embedded parts, columns, beams
-
No price
The main task of profile design is to select the profile form, determine the height of the workshop, and handle issues such as lighting, ventilation, and drainage in the workshop.The selection of the cross-section form of the factory should comprehensively consider the influence of production technology, lighting and ventilation requirements, roof drainage methods, and the structural form of the factory. The following figure shows the cross-sectional forms of several common reinforced concrete bending structures.
-
No price
1. The characteristics of light steel structures in textile industry factories are generally divided into ordinary steel structures and light steel structures, with no clear boundary between them. The calculation rules are the same. The so-called light steel structure is generally a type of structure with small structural loads, small structural components, and thin component walls. Generally speaking, portal steel frames, roof trusses, and spatial trusses are the main load-bearing structures. Due to the small load acting on light steel structures, the internal forces generated by structural effects are generally small, which makes the strength of the structure often not a problem. Due to the small cross-section of the components, the inertia distance of the cross-section is small, and the stiffness of the structure is also reduced.
-
No price
1. Solid chemical fire protection. Low ignition point of combustible solids. Heating, impact, friction, or contact with oxidants can cause rapid and continuous reactions, leading to combustion or explosion. When there are combustible solids in the fire, water, sand, foam, carbon dioxide, dry powder, asbestos blanket and other extinguishing agents and equipment can be used to extinguish the fire. In addition, when powdered solids catch fire, they should not be strongly impacted by fire extinguishing agents to prevent dust from being washed away and forming explosive mixtures in the air, causing explosions. Flammable solids such as phosphorus compounds, nitro compounds, and sulfur can produce toxic and irritating gases when ignited. Rescue personnel should stand against the wind to avoid poisoning.
-
No price
With the continuous development of the construction industry, engineering material technology is also constantly advancing and innovating. Steel structures have the characteristics of high strength, strong load-bearing capacity, good seismic performance, small self occupied space, convenient manufacturing and equipment of steel components, and are widely used in the construction and processing industries.
-
No price
1. Low safety and reliability Compared with traditional residential building materials, it has better seismic performance, sound insulation performance, waterproof performance, and thermal insulation performance. Steel has good ductility and can better consume the energy brought by earthquakes, so it has good seismic performance and high structural safety, ensuring the safety of buildings.
|
|