Hotline

(+86)137-7105-3760

Home >> Cases >>Chemical Factory Buildings >> Chemical Factory Buildings
Product Detail

Chemical Factory Buildings

  • DETAILS

1715072504403520.jpeg


Disposal methods for chemical plant fire accidents

1. Solid chemical fire protection. Low ignition point of combustible solids. Heating, impact, friction, or contact with oxidants can cause rapid and continuous reactions, leading to combustion or explosion. When there are combustible solids in the fire, water, sand, foam, carbon dioxide, dry powder, asbestos blanket and other extinguishing agents and equipment can be used to extinguish the fire. In addition, when powdered solids catch fire, they should not be strongly impacted by fire extinguishing agents to prevent dust from being washed away and forming explosive mixtures in the air, causing explosions. Flammable solids such as phosphorus compounds, nitro compounds, and sulfur can produce toxic and irritating gases when ignited. Rescue personnel should stand against the wind to avoid poisoning.

2. Extinguishing chemical fires that have adverse reactions to water. The common feature of this type of material is that when it encounters water, it undergoes a violent chemical reaction, producing combustible gases, releasing heat, and even causing combustion and explosion. When exposed to water and burned, use fire to treat dry sand, dry powder, etc. When extinguishing with water, it is strictly prohibited to use water, acid, alkali extinguishing agent and foam extinguishing agent. In the case of water combustion, such as lithium, sodium, potassium, rubidium, cesium, strontium, etc., due to their highly active chemical properties, they can capture oxygen in carbon dioxide and cause chemical reactions, making the combustion more intense. Therefore, they cannot be extinguished together with carbon dioxide.


1715072487112846.jpeg

       

3. Extinguish spontaneous chemical fires. Although this material does not come into contact with open flames, it can oxidize and release heat in the air at a certain temperature. Due to the non dispersion of accumulated heat, combustion can occur when the ignition point is reached. Spontaneous combustion materials can be divided into three types: one is severe oxidation in the air at room temperature, causing spontaneous combustion, such as yellow phosphorus; Another method is to heat up to the ignition point, release heat, and without the need for external oxygen supply, decompose oxygen on its own and continue combustion, such as nitro film, aluminum iron solvent, etc; Another method is to slowly oxidize in the air. If the ventilation is poor, the accumulated heat will not disperse and can self ignite when it reaches the self ignition point, such as oily materials such as oil paper. When a fire occurs, except for triethylaluminum and aluminum iron solvents, water cannot be used to extinguish it. A large amount of water can be used to extinguish the fire. Sand, carbon dioxide, and dry powder can also be used to extinguish fires. Due to the contact between triethylaluminum and water, ethane and aluminum iron solvents are produced. When burned at high temperatures, they can decompose water to produce hydrogen gas and cannot be extinguished with water.

4. Extinguish the flames of toxic and corrosive chemical industries. When toxic substances catch fire, water or other fire extinguishing agents can generally be used to extinguish the fire. However, when cyanide, selenide, and phosphide in toxic substances catch fire, acid-base fire extinguishing agents cannot be used for extinguishing fires, while water mist or carbon dioxide can only be used for extinguishing fires. When corrosive substances catch fire, they can be saved by fog water, dry sand, foam, dry powder, etc. When acidic corrosive agents such as sulfuric acid and nitric acid catch fire, it is not allowed to use pressurized and dense water to extinguish the fire, as dense water can cause the acidic liquid to heat up or even boil, splatter everywhere, and harm firefighters. When dealing with toxic and corrosive articles in firefighting, attention should also be paid to saving water and the direction of water flow. At the same time, it is important to ensure that sewage flows into the sewage pipeline as much as possible, as the overflow of toxic or corrosive substances from firefighting sewage can pollute the environment and even water sources. In addition, personal protective measures should be taken and gas masks and masks should be used.


1715072471152143.jpeg



Phone: (+86) 137-7105-3760

Contact person: Mr. Xiao

Address: Workshop No. 9, Baishiao No.3, Xiashan, Hengpi Town, Enping City, Guangdong Province



Navigation


Home                          Products

About                          Cases

News                          Contact





WeChat


×
seo seo