Hotline

(+86)137-7105-3760

Home >> Products >>Roof System >>Aluminum Magnesium Manganese Plate >> YX65-600 Aluminum Magnesium Manganese Plate
Product Detail

YX65-600 Aluminum Magnesium Manganese Plate

  • DETAILS

YX65-600 aluminum magnesium manganese alloy roof leakage is a serious problem in real life:

1) The roof design has a large curvature, and the roof panels are not perpendicular to the secondary purlins. The position of the board joints is a weak link. It has a certain impact on the quality of waterproofing;

2) The installation of drainage ditches is not standardized, there are too many sections, and the structural design does not have a slope along the length direction, resulting in a small water flow slope and accumulated water;

3) The distribution space of T-shaped supports is too large, resulting in uneven stress, deformation, and water leakage;

4) During installation, the T-shaped support is not perpendicular to the purlin, causing excessive gaps between the aluminum magnesium manganese roof panels and resulting in water leakage;

5) Due to the use of stainless steel welding for downspouts and sinks, there is significant deformation, resulting in local uplift and water accumulation;

6) The workers were not proficient in operating the edge grinding machine, resulting in water leakage.

Corresponding measures can be taken to address the above issues:

1) Strengthen the secondary detailed design and pay attention to any inconvenience that may occur during installation;

2) Ensure the slope of the drainage ditch, correct it in a timely manner during the construction process, reduce the accumulation of errors, and ensure smooth drainage;

3) T-shaped supports are evenly arranged;

4) The connection between the T-shaped support and the purlin should be vertical and the gap should be minimized as much as possible;

5) When welding drainage ditches, preheat the surrounding area first to reduce welding deformation and protrusions, and control the error within 2mm. Strengthen post weld inspection and polishing;

6) Train skilled workers to operate edge grinding equipment.


1689214928777509.jpeg


Phone: (+86) 137-7105-3760

Contact person: Mr. Xiao

Address: Workshop No. 9, Baishiao No.3, Xiashan, Hengpi Town, Enping City, Guangdong Province



Navigation


Home                          Products

About                          Cases

News                          Contact





WeChat


×
seo seo