Hotline

(+86)137-7105-3760

Home >> Products >>Roof System >>Aluminum Magnesium Manganese Plate >> YX25-400 Aluminum Magnesium Manganese Plate
Product Detail

YX25-400 Aluminum Magnesium Manganese Plate

  • DETAILS

The external surface treatment of aluminum, magnesium, and manganese includes two categories: natural color non painted products and painted products.

a. Non spray painted products: hammer patterned aluminum alloy plate (irregular pattern), embossed plate (mechanical embossing to form regular pattern); Pre passivated aluminum oxide surface treatment plate. This type of product does not require painting treatment on the surface of the board, has low requirements for surface appearance, and is also cost-effective.

b. Coating products: According to the coating process, they can be divided into: spray painted board products and pre rolled coating boards; According to the type of coating, it can be divided into: polyester, polyamide, modified silicone, epoxy resin, fluorocarbon, etc. The ultraviolet aging resistance of the coating shall be extended as far as possible, and PVDF coating (fluorocarbon coating) has good aging resistance.

Aluminum magnesium manganese roof can be divided into vertical locking edge roof panels and vertical locking seam roof panels according to the overlapping method.

1. Vertical locking aluminum magnesium manganese roof panel

Vertical locking design is mainly suitable for tight installation systems with large-span self-supporting. The support method is hidden below the panel. The top plate is connected by its dedicated aluminum alloy fixing bracket. The vertical locking edge of the board is tightly connected to the bite of the board, and is completely completed by the machine automatically.

2. Aluminum magnesium manganese vertical seam roof panel

Vertical seam aluminum magnesium manganese roof panels can be made into aluminum magnesium manganese fan-shaped panels, aluminum magnesium manganese arc-shaped panels, etc. based on their flexibility and plasticity, greatly meeting the design requirements of beautiful and durable metal roofs. Therefore, it is widely used in large buildings such as metal roofs, airport metal roofs, theater metal roofs, factory metal roofs, urban landmark buildings, and civil buildings. It belongs to the roof category. From the perspective of actual engineering inspection, it is recommended to use a high vertical edge system with a height of 75mm.


1689214659268064.jpeg


Phone: (+86) 137-7105-3760

Contact person: Mr. Xiao

Address: Workshop No. 9, Baishiao No.3, Xiashan, Hengpi Town, Enping City, Guangdong Province



Navigation


Home                          Products

About                          Cases

News                          Contact





WeChat


×
seo seo