|
Floor Bearing Plate Plug
Steel truss floor support plate is a type of unsupported compression composite floor support plate; The steel truss is formed and processed on the backend processing site. On site construction requires placing the truss floor support plate in the correct position, welding steel bars, and then welding bolts. The steel truss is then placed and tied, and concrete is poured after passing the acceptance inspection. So how to ensure the installation quality of truss floor support plates and the safety of installation personnel? What should I pay attention to? The following points need to be noted: (1) Personnel are strictly prohibited from walking under the steel truss floor slab load-bearing plate construction floor slab. (2) When laying steel truss floor support plates, both filling and laying must be carried out simultaneously. It is strictly prohibited to lay loose boards without fixing them, and temporary laying with truss floor support boards is strictly prohibited. If the building has irregular edges, be careful of safety. (3) It is strictly prohibited to walk on truss floors that have not been fixed or have not been equipped with temporary supports according to design requirements. It is strictly prohibited to step on galvanized bottom formwork steel plates while walking to prevent accidents. (4) After the installation of the steel truss floor support plate, the opening should be closed in a timely manner and guardrails with obvious signs should be set up. (5) Special attention should be paid to cleaning and inspecting the area around and below the thermal cutting area to prevent the occurrence of fire hazards. Effective fire-fighting equipment must be equipped and inspected by specialized personnel.
|
