Steel truss floor load-bearing plate is a comprehensive building product that welds the load-bearing steel bars inside the floor slab into a factory steel truss, and integrates the steel truss with galvanized steel plates to form a template and load-bearing steel bars. Steel truss floor load-bearing plate is a new technology that can withstand wet concrete and construction loads during the construction phase. During the usage phase, the steel truss becomes concrete reinforcement and bears the usage load.
Steel truss plate load-bearing plate concrete floor slab has advantages such as good integrity, high stiffness, good fire resistance, no formwork, and fast construction speed. The force mode of the steel truss is reasonable, and the height of the truss and the diameter of the steel bars can be adjusted to achieve a large span. Steel truss load-bearing plate steel-concrete composite floor can reduce secondary beams, with fast welding speed of shear bolts and stable construction quality. Steel truss floor support plate, as a mature new technology, has been widely used in domestic and foreign construction projects, and has broad application prospects in multi story buildings.
The steel truss floor load-bearing plate combines the steel bars inside the concrete floor with the construction formwork, and can withstand the wet concrete weight and construction load during the construction phase. It can also serve as lateral support for steel beams during the construction phase. During the usage phase, the steel truss and concrete jointly bear the usage load. Unlike traditional construction methods, on the construction site, the steel truss floor load-bearing plate can be directly laid on the beam, and then simple steel reinforcement engineering can be carried out. Concrete and floor construction do not require wooden formwork and scaffolding, and the galvanized steel plate at the bottom is only used for formwork without replacing the stress of steel reinforcement. Therefore, there is no need to consider fire retardant coatings and anti-corrosion maintenance, and thin steel plates can be used. In addition, the main load-bearing steel bars on the floor are positioned and welded on the automatic control production line. The steel bars are evenly arranged, accurately positioned, and the construction speed is fast, which can reduce the on-site steel bar binding work by about 70%, greatly shorten the construction period, and save costs. Fully ensure the spacing between upper and lower steel bars and the thickness of the concrete protective layer, creating favorable conditions for improving the quality of floor construction. The steel truss floor load-bearing plate welds the steel bars into a whole, with high overall stiffness and minimal deformation of the floor when pouring concrete. Temporary support is generally not required and can withstand large loads during the construction phase.
