|
How can color steel plates be waterproof?The waterproofing problem of color steel roofs has always been a concern for design and construction personnel. If the color steel roof leaks, it will directly affect the overall use function and service life of the color steel factory, and also affect the life safety and production safety of the people. Therefore, identifying problems is crucial! Problem 1: Quality issues with waterproof materials The so-called "high-quality waterproof materials" that are currently popular in the market, if tested according to national or industry standards, the widely used color steel tile waterproof materials are mostly unqualified products. Nowadays, the prevalence of a large number of counterfeit and inferior products in the building materials market has led to a shortage of real waterproof materials in the market. Therefore, in terms of material selection, we must make further efforts, and the selection of waterproof materials must meet product standards. Problem 2: The design did not pay attention to it The uncertainty in the thickness design of the waterproof layer makes it difficult to meet the waterproof requirements of the color steel workshop due to the mismatch in the nature, importance, and function of the waterproof layer. The design of the waterproof and insulation layer on the workshop roof by the design unit is completely unreasonable. This will keep the insulation layer of the building moist and absorb moisture from the air, causing the local waterproof layer to arch. Repeating this process will cause the waterproof layer to deform and accelerate aging due to changes in temperature and humidity, leading to quality problems in the workshop waterproofing. Problem 3: The construction unit lacks strong quality awareness Counterfeit and inferior products in the color steel tile waterproof material market, many construction units will directly use the waterproof material for construction without inspection, and the general contractor review is not strict, allowing low-quality contractor teams to undertake construction. Contractors cut corners and cut corners. Many workers did not receive training in operation and knowledge before construction, nor did they obtain work permits. They lacked understanding of waterproof materials and construction and acceptance standards for waterproofing projects. Quality control during the construction process was not strict, resulting in poor construction quality. Fault 4: Inadequate use and maintenance management Due to the long-term exposure of the color steel tile roof to the natural environment, the waterproof layer of the color steel cannot be guaranteed for a long time. After the completion of steel structure engineering, inadequate management and maintenance of project delivery resulted in leakage of color steel plates. The above four points are likely to be the culprits leading to quality issues in color steel roof waterproofing engineering, Therefore, if you want to ensure that the color steel roof waterproofing project is leak free, you should choose good color steel tiles and color steel plates. Cheap color steel plates not only cannot be used for waterproofing, but also have a relatively short service life.
|
