|
|
The installation technology advantages of closed floor support plates over open floor support plates1¡¢ The support plate of the closed building is strictly processed in accordance with the design planking diagram in the factory, and the order of arrangement is numbered. On site construction does not require cutting or repairing the plate, making it easy for the steel structure company to install it on site; 2¡¢ When arranging the slab of a closed floor, it is only necessary to arrange it in order of the span. When it is connected to the steel beam in order, due to the flat bottom of the slab, there is sufficient solid connection area with the steel beam. This way, it can be directly laid without any processing (the perforated plate needs to be cut and repaired to avoid overlapping with the steel beam); 3¡¢ The opening floor support plate should be sealed at the opening to prevent concrete leakage from the opening opening at the bottom of the plate. The opening floor support plate does not have an end blocking plate due to the closure of the web plate; 4¡¢ The closed floor slab has a flat bottom and can fully integrate with the upper wing plate of the steel beam, regardless of whether it is horizontally or vertically overlapped with the steel beam. This way, the top surface of the upper wing plate of the steel beam does not need to be sprayed with fireproof coating. But there is a cavity between the perforated steel bearing plate and the steel beam, which needs to be filled with shoulder braces; 5¡¢ The enclosed floor slab completely replaces the lower layer steel bars, reduces the amount of on-site steel bar production, reduces on-site labor, and accelerates construction speed. At the same time, the original reinforcement design for the lower layer has been cancelled, providing greater space for laying wire conduits on the floor.
|
